ROSA3D's PET-G Standard filament is characterized by ease of printing comparable to that of PLA. Dedicated to people who deal with amateur and professional printing in 3D technology.
 Details made of PET-G Standard are characterized by precise details, good adhesion to the worktable, odorless and low shrinkage. Prints made in PET-G Standard are characterized by high chemical resistance .

 They can be subjected to sandblasting, drilling, sawing, sandblasting, cutting and painting without the structural integrity of the element being damaged.

 The PET-G standard is made from raw materials that are allowed to come into contact with food, in accordance with EU and FDA regulations.

 Recommended printing temperature 220-260 ° C.
 Recommended tray temperature: 60-80 ° C

 TECHNICAL PARAMETERS PET-G standard

 Diameter : 1.75 mm
 Tolerances on the diameter : +/- 0.05 mm
 Prevalence tolerances : +/- 0.02 mm
 Net weight : 800g (vacuum packing with moisture absorber)
 Printing temperature : 220-260 ° C
 Plate temperature : 60-80 ° C


 PHYSICAL PARAMETERS PET-G standard

 Density: 1.29 g / cm3
 Odor : odorless
 Impact resistance according to the Izod notched impactor method : 4.7 kJ / m2 (ISO 180)
 Tensile elongation (speed 5 mm / min, until break): 5.5% (ISO 527)
 Tensile strength (at break) : 47 MPa (ISO 527-2)
 Tensile modulus of elasticity : 2980 MPa (ISO 527-2)
 Thermal distortion temperature : 78 ° C (ISO 306)